We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.
SKU
RB1/200054
Lemat Cavalry 6.75" .44
The Le Mat shot barrel is fired by cocking the hammer and flipping down the hammer nose to strike the lower nipple for the barrel. Unlike other wedge retained black powder revolvers, the Le Mat is easily taken apart by using the take down lever and unscrewing the whole barrel assembly. The Cavalry model features include a case hardened hammer and trigger, blued steel parts, checkered walnut two-piece grip, lanyard ring, and spurred triggerguard.
MSRP
$1,448.25
$1,448.25
Out of stock
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
The Le Mat revolver is considered the most awesome hand-held firing weapon ever produced. This nine-shot revolver with a 20GA single-shot barrel was a favorite among Confederate cavalry officers. The Le Mat shot barrel is fired by cocking the hammer and flipping down the hammer nose to strike the lower nipple for the barrel. Unlike other wedge retained black powder revolvers, the Le Mat is easily taken apart by using the take down lever and unscrewing the whole barrel assembly. The Cavalry model features include a case hardened hammer and trigger, blued steel parts, checkered walnut two-piece grip, lanyard ring, and spurred triggerguard. This infamous revolver is must-have addition to any black powder collection! A conversion cylinder is not available for this model.
SKU | RB1/200054 |
---|---|
MSRP | 1448.25 |
Weight (LB) | 3.52 |
FFL Dealer Required | No |
Manufacturer | Pietta |
New Arrival Product | No |
UPC | 83966500458 |
Action Type | Single action |
Backstrap Finish | Blued steel |
Barrel Bore Diameter | 0.446" |
Barrel Contour | Octagonal |
Barrel Finish | Blued steel |
Barrel Grooves | 7 |
Barrel Length (in) | 6.75" |
Barrel Twist & Rotation | LH 1x30" |
Caliber | .44 & 20G |
Capacity | 9 & 1 20G shot |
Cylinder Bore Min/Max | 0.445"/0.447" |
Cylinder Finish | Blued steel roll engraved |
Firing Sequence | Hammer selector |
Frame Finish | Blued steel |
Front Sight | Dovetail blade |
Grip Finish | Walnut checkered |
Ignition Type | Percussion |
Overall Length (in) | 13.4" |
Percussion Cap Type | #10 or #11 |
Rear Sight | Rear Sight Notch On Hammer |
Recommended Bullet/Shot | 0.454" round ball and 0.27" round ball |
Recommended Conversion Cylinder Model | No conversions available |
Recommended Powder Load | 12-35 grains of FFFG and 25-35 grains of FFFG blackpowder |
Taylor Tuning Option | Taylor tuning not available |
Trigger Type & Pull | Single trigger |
Triggerguard Finish | Blued steel spurred |
Downloadable Documents
Write Your Own Review
Related Products
Check items to add to the cart or